Overview
The Keysight E5071C ENA is a vector network analyzer for measuring S-parameters such as return loss and insertion loss on filters, cables, amplifiers, and other RF components. Choose the test-set option for your sweep band, port count, and DC bias requirements.
Two-port and four-port versions cover several different frequency ranges. The 280 version covers 9 kHz to 8.5 GHz without built-in bias tees, while the 2K5 version covers 300 kHz to 20 GHz and includes them. Time-domain or frequency-offset measurements require the corresponding software option.
Configuration options
| Option | Configuration | What to check |
|---|---|---|
| 230 / 430 | 9 kHz to 3 GHz | 2 ports with 230 or 4 ports with 430. No built-in bias tees. Earlier options. |
| 235 / 435 | 100 kHz to 3 GHz | 2 ports with 235 or 4 ports with 435. Built-in bias tees. Earlier options. |
| 240 / 440 | 9 kHz to 4.5 GHz | 2 or 4 ports respectively. No built-in bias tees. |
| 245 / 445 | 100 kHz to 4.5 GHz | 2 or 4 ports respectively. Built-in bias tees. |
| 260 / 460 | 9 kHz to 6.5 GHz | 2 or 4 ports respectively. No built-in bias tees. |
| 265 / 465 | 100 kHz to 6.5 GHz | 2 or 4 ports respectively. Built-in bias tees. |
| 280 / 480 | 9 kHz to 8.5 GHz | 2 or 4 ports respectively. No built-in bias tees. |
| 285 / 485 | 100 kHz to 8.5 GHz | 2 or 4 ports respectively. Built-in bias tees. |
| 2D5 / 4D5 | 300 kHz to 14 GHz | 2 or 4 ports respectively. Built-in bias tees. |
| 2K5 / 4K5 | 300 kHz to 20 GHz | 2 or 4 ports respectively. Built-in bias tees. |
Confirm the E5071C configuration
Request current availability, photos of the offered unit, its test-set option, installed software, and a list of included items. If you need a calibration report or a compatible calibration kit, tell us your sweep range and connector type so the quote can identify what is available.
Model FAQ
Does every E5071C cover 20 GHz?
The 2K5 and 4K5 test sets extend to 20 GHz and start at 300 kHz. For a sweep starting at 9 kHz, choose the matching option without built-in bias tees. The 280 and 480 configurations, for example, stop at 8.5 GHz. Include your minimum and maximum frequencies in the quote request.
What should I confirm for a balanced four-port or time-domain measurement?
Ask for a photo that confirms four physical test ports and a list of enabled software options. For time-domain work, specify whether you need option 010 or enhanced analysis with option TDR. Include your connector type and any existing calibration kit or ECal model.
Does the analyzer come with a calibration kit or a calibration certificate?
A compatible kit or ECal module is used to calibrate the measurement setup at the test ports. An instrument calibration certificate documents the results for an individual analyzer. Ask for the quote to state which items and records are available for the offered unit.
Manufacturer lifecycle
Keysight lists the E5071C as obsolete and identifies the E5080B ENA as its replacement. Check port, software and fixture compatibility before switching.
Manufacturer documents
Specifications
Key Specifications
- Measurement type
- Vector S-parameter measurement on 2-port or 4-port test sets, depending on the hardware option.
- Frequency coverage
- Depending on option, the sweep starts at 9 kHz, 100 kHz, or 300 kHz and extends to 3, 4.5, 6.5, 8.5, 14, or 20 GHz. Match the start and stop frequencies to the same test-set option in Product Overview.
- IF bandwidth
- 10 Hz to 1.5 MHz. See the data sheet for performance conditions and test-set limitations.
- Sweep points
- 2 to 20,001 points.
- RF test port examples
- Option 480 uses female Type-N ports. Options 2K5 and 4K5 use male 3.5 mm ports. Match cables and calibration standards to the offered test set.
- Computer interfaces
- LAN, USB, and GPIB. Confirm the installed firmware when integrating with an existing test program or electronic calibration module.
- Optional measurement software
- 008 enables frequency-offset mode, 010 adds time-domain analysis, and TDR adds enhanced time-domain analysis.
Sales and Service
- Warranty
- 6-Month Warranty
- Calibration Status
- Calibration certificate or test report available (as stated in your quotation)
Documents
Why work with us?
We check the details with you
From specifications to accessories, we help you understand what's included.
Know what you're buying
We share what we know about the condition, along with any available records.
Tell us what you need
Have a specific requirement or deadline? We'll focus on what matters to you.
No need to start over
We keep track of your questions and previous discussions, so it's easy to pick up where we left off.
A closer look at E5071C
